"

Products

Dispenser Controller DA55D/DV55D series

The dispenser controller DA55D or DV55D series dispenses low viscosity (such as water) to high viscosity fluids accurately and consistently. It is coupled with digital timing circuit with digital timing from standard 0.01-9.99 seconds. The timer range can be increased by 1 digit using a constant bleed type of regulator.

Steady dispensing is possible from negligible volume by using an electromagnetic valve high speed operating circuit. Complete protection from staining of adhesives is ensured with the use of stainless steel chassis. A wide range of systems can be supported by combining dispenser controller with a dispensing valve. The test switch can be used to adjust and identify the dispensing volume.

The DV55D series is coupled with vacuum mechanism to control the dripping of low viscosity fluids.

  • Digital dispensing timer from 0.01-9.99 seconds
  • Adjustable vacuum mechanism to control material ‘tailing’ or waste (Function Only For DV55D)
  • Test switch for adjusting and identifying the dispensing volume
  • 2 operation modes, timer mode (Fixed volume dispensing) and free mode (Continuous dispensing) are available
  • Standard Accessories included: Power cable (2m), foot switch or metal electrical socket
Model
DA55D
Control System
Air Pressure Electronically controlled
Power Supply
AC100V±10% 50/60Hz
Power Consumption
7VA or less
Operating mode
Timer mode (Dispensing fixed volume)
Free mode (Continuous dispensing)
Timer
0.01 ~ 9.99sec (Digital setting)
Operating capability
400 times/minute
Weight
2.1kg
Dispensing end signal (Relay output)
AC125V (less than 0.5A) or DC30V (less than 2A)
Standard accessories
Power cable, foot switch
or metal electrical socket
Note
AC200V, AC220V, AC240V relay output also available

 

Model
DV55D
Control System
Air Pressure Electronically controlled
Power Supply
AC100V±10% 50/60Hz
Power Consumption
7VA or less
Operating mode
Timer mode (Dispensing fixed volume)
Free mode (Continuous dispensing)
Timer
0.01 ~ 9.99sec (Digital setting)
Operating capability
400 times/minute
Weight
2.2kg
Dispensing end signal (Relay output)
AC125V (less than 0.5A) or DC30V (less than 2A)
Standard accessories
Power cable, foot switch
or metal electrical socket
Note
AC200V, AC220V, AC240V relay output also available

All Products

Dispenser Controller DA55D/DV55D series

Fill out the form below, and we will be in touch shortly.

Dispenser Controller DA55D/DV55D series

Fill out the form below, and Download Catalogues.