Dispenser Controller DA55D/DV55D series

The dispenser controller DA55D or DV55D series dispenses low viscosity (such as water) to high viscosity fluids accurately and consistently. It is coupled with digital timing circuit with digital timing from standard 0.01-9.99 seconds. The timer range can be increased by 1 digit using an internal switch. (Max 0.1 second-99.9 seconds) The dispensed volume ranges from 0.0001cc/shot to large volume. The stability of the pressure is improved by using a constant bleed type of regulator.

Steady dispensing is possible from negligible volume by using an electromagnetic valve high speed operating circuit. Complete protection from staining of adhesives is ensured with the use of stainless steel chassis. A wide range of systems can be supported by combining dispenser controller with a dispensing valve. The test switch can be used to adjust and identify the dispensing volume.

The DV55D series is coupled with vacuum mechanism to control the dripping of low viscosity fluids.

Enquire Now
  • Digital dispensing timer from 0.01-9.99 seconds
  • Adjustable vacuum mechanism to control material ‘tailing’ or waste (Function Only For DV55D)
  • Test switch for adjusting and identifying the dispensing volume
  • 2 operation modes, timer mode (Fixed volume dispensing) and free mode (Continuous dispensing) are available
  • Standard Accessories included: Power cable (2m), foot switch or metal electrical socket
Model
DA55D
Control System
Air Pressure Electronically controlled
Power Supply
AC100V±10% 50/60Hz
Power Consumption
7VA or less
Operating mode
Timer mode (Dispensing fixed volume)
Free mode (Continuous dispensing)
Timer
0.01 ~ 9.99sec (Digital setting)
Operating capability
400 times/minute
Weight
1.9kg
Dispensing end signal (Relay output)
MAX.125V, MAX.1A, MAX.30VA
Standard accessories
Power cable, foot switch
or metal electrical socket

 

Model
DV55D
Control System
Air Pressure Electronically controlled
Power Supply
AC100V±10% 50/60Hz
Power Consumption
7VA or less
Operating mode
Timer mode (Dispensing fixed volume)
Free mode (Continuous dispensing)
Vacuum mechanism
Built into the body
Timer
0.01 ~ 9.99sec (Digital setting)
Operating capability
400 times/minute
Weight
1.9kg
Dispensing end signal (Relay output)
MAX.125V, MAX.1A, MAX.30VA
Standard accessories
Power cable, foot switch
or metal electrical socket

 

Note:

The operating capability is the capability of the controller, and it is not a guarantee of the dispensing capability.