Dispenser Controller DA55n/DV55n series

The dispenser controller DA55n or DV55n series dispenses low viscosity (such as water) to high viscosity fluids accurately and consistently. It is coupled with vacuum mechanism to control to dripping of low viscosity fluids. The dispensed volume ranges from 0.0001cc/shot to large volume. The stability of the pressure is improved by using a constant bleed type of regulator. Steady dispensing is possible from negligible volume by using an electromagnetic valve high speed operating circuit. Complete protection from staining of adhesives is ensured with the use of stainless steel chassis. A wide range of systems can be supported by combining the dispenser controller with a dispensing valve. The dispensing can be checked by pressing the test switch on the panel.

The DV55n series is equipped with vacuum mechanism to control the dripping of low viscosity fluids.

Enquire Now
  • Adjustable vacuum mechanism to control material ‘tailing’ or waste (Function Only For DV55n)
  • Test switch for checking dispensing before actual operation
  • 2 operation modes, timer mode (Fixed volume dispensing) and free mode (Continuous dispensing) are available
  • Standard Accessories included: Power cable (2m), foot switch or metal electrical socket
Model
DA55n
Control System
Air Pressure Electronically controlled
Power Supply
AC100V±10% 50/60Hz
Power Consumption
7VA or less
Operating mode
Timer mode (Dispensing fixed volume)
Free mode (Continuous dispensing)
Timer
0.01 ~ 3 sec (Analog setting)
Operating capability
400 times/minute
Weight
1.9kg
Dispensing end signal (Relay output)
MAX.125V, MAX.1A, MAX.30VA
Standard accessories
Power cable, foot switch
or metal electrical socket

 

Model
DV55n
Control System
Air Pressure Electronically controlled
Power Supply
AC100V±10% 50/60Hz
Power Consumption
7VA or less
Operating mode
Timer mode (Dispensing fixed volume)
Free mode (Continuous dispensing)
Vacuum mechanism
Built into the body
Timer
0.01 ~ 3 sec (Analog setting)
Operating capability
400 times/minute
Weight
1.9kg
Dispensing end signal (Relay output)
MAX.125V, MAX.1A, MAX.30VA
Standard accessories
Power cable, foot switch
or metal electrical socket

 

Note:

The operating capability is the capability of the controller, and it is not a guarantee of the dispensing capability.