Pressure Tank TN series

Pressure Tank TN series is designed to make the lid smaller than the diameter of the body in order to reduce cost. This series has a narrow opening as compared to the pressure tank TB series.

Since there are 2 types of bottom for 30L and 40L: the angular leg type and skirted type, please select the model based on your application.

This pressure tank is the only series with capacity of 50L and 100L.
Material outlet port uses 1.5S ferrule, thus pipe layout is simple.

Enquire Now
Model
TN3B
TN5B
TN10B
TN20B
TN30A
TN30B
TN40A
TN40B
TN50A
TN100A
Tank Capacity
3L
5L
10L
20L
30L
30L
40L
40L
50L
100L
Weight
4.5kg
5.5kg
7.5kg
9.8kg
17.8kg
15.2kg
19.9kg
17.5kg
32kg
48kg
Material
SUS304
Operating Pressure
Maximum 0.49MPa
Less than 0.2MPa
Lid Attach /
Detach Mechanism
Ferrule clamp type
Fluid Outlet
Bottom port (Lower) Rc3/8 (standard)
Air Pressure Port
Top port (Upper) Rc1/4 (standard)
Sealing Method
O-ring seal (NBR standard)
Finish
Buffing of the inside and outside surface

 

Notes:

Other than the standard NBR, the materials in which the O-ring is available are FKM, silicone, EPDM, FFKM,  FEP/SI double O-ring etc. Please select the one which suits the material you are using.