Products

Pressure Tank TMC series (clam type)

Compared to our standard products, the TN stainless steel tank series, this TM stainless steel tank series is light and economical. This is the only series among the lightweight type that can be used with the stirrer unit as standard equipment. This series has a level gauge (optional) that can check over a wider surface level in the tank and almost the entire volume in the tank as compared to the TM top port series. The TMC series relief valve is optional. Please choose the most suitable product from the Tank Options category.

Model	TMC5	TMC10	TMC21	TMC30	TMC39
Tank Capacity	5L	10L	20L	30L	39L
Weight	3.2kg	4.1kg	5.3kg	7.7kg	8.7kg
Material	SUS304
Operating Pressure	Maximum 0.49MPa
Lid Attach/Detach Mechanism	Ferrule Clamp Type
Lid Size	90A (Opening Φ95.6)			100A (Opening Φ108.3)
Fluid Outlet	Bottom port(lower part) Rc1/4			Bottom port (lower part) Rc3/8
Air Pressure Port	Top port (upper part) Rc1/4
Sealing Method	O ring seal(NBR standard)
Finish	Acid cleaning of the inner surface and hairline of the outer surface (Straight barrel)

Notes:

Other than the standard NBR, the materials in which the O-ring is available are FKM, silicone, EPDM, FFKM, FEP/SI double O-ring etc. Please select the one which suits the material you are using.