Product Categories
Browse By Application
Browse By Industry
Pressure Tank TN series is designed to make the lid smaller than the diameter of the body in order to reduce cost. This series has a narrow opening as compared to the pressure tank TB series.
Since there are 2 types of bottom for 30L and 40L: the angular leg type and skirted type, please select the model based on your application.
This pressure tank is the only series with capacity of 50L and 100L.
Material outlet port uses 1.5S ferrule, thus pipe layout is simple.
| Model | TN3B | TN5B | TN10B | TN20B | TN30A | TN30B | TN40A | TN40B | TN50A | TN100A |
| Tank Capacity | 3L | 5L | 10L | 20L | 30L | 30L | 40L | 40L | 50L | 100L |
| Weight | 4.5kg | 5.5kg | 7.5kg | 9.8kg | 17.8kg | 15.2kg | 19.9kg | 17.5kg | 32kg | 48kg |
| Material | SUS304 | |||||||||
| Operating Pressure | Maximum 0.49MPa | Less than 0.2MPa | ||||||||
| Lid Attach / Detach Mechanism | Ferrule clamp type | |||||||||
| Fluid Outlet | Bottom port (Lower) Rc3/8 (standard) | |||||||||
| Air Pressure Port | Top port (Upper) Rc1/4 (standard) | |||||||||
| Sealing Method | O-ring seal (NBR standard) | |||||||||
| Finish | Buffing of the inside and outside surface | |||||||||
